Step 1.
Start IPCamFinder search application.
Select your PC’s network card. Click Find
IP Cam to automatically scan the IP-Cam
camera you just installed.
Step 2.
A default IP Address 00:15:0F:00:00:22
192.168.1.100 appears in the IP Cam List
column.
Step 3.
Click 00:15:0F:00:00:22 with left mouse
button once to fill the new address data
into lower columns.
Step 4.
After changing the connection mode
to PPPoE and filling in User Name
and Password, click the Setting
button again. A new set of IP Address
00:15:0F:00:00:22 125.225.2.202
appears in the upper search column.
Click 00:15:0F:00:00:22 again to fill the
new Address data into the following
columns.
Step 5.
Click Show IP Cam with left mouse
button once to automatically open
Browser and access into network
monitoring screen.
Example:
1.Now, IP-CAM is set up with
the IP address in LAN.
2.Or, use IPCamFinder
search application to access
into network monitoring
screen according to the
instructions in Figure 7.
3.Or, turn on your PC and
open Browser. Type in IP=>
125.225.2.202 to access into
network monitoring screen.
Figure 7
1.
2.
3.
4.
5.
********
