Perle C/CM 10GRT-SFP Media Converter Module Installation Guide 17
Installing the Simplex Fiber Cable
1.
Locate a 1000/10GBase-X compliant simplex (1-strand)
fiber cable with appropriate connectors.
2.
Connect the fiber cable from the SFP/SFP+ to the other
media converter/switch/fiber device.
Installing the Copper Cable
1.
Locate 10/100/1000/10GBase-T compliant copper cables
with male, RJ-45 connectors installed at both ends.
2.
Connect the RJ-45 cable between the Perle
media converter module and the device.
Note: The Perle Media Converter Module supports
Auto-MDIX which allows a straight-through or
cross-over Ethernet cable.