Perle C/CM 10GRT-SFP Media Converter Module Installation Guide 18
Module Temperature Protection
All C/CM-10GRT modules come equipped with
module temperature protection. Should an
inserted SFP/SFP+ module operate above its
specified maximum operating temperature, the
C/CM-10GRT will reduce the power to that
module/s. The C/CM-10GRT will continue to
monitor the modules’ temperature until the
temperature is below the maximum operating
temperature and then the C/CM-10GRTwill return
the module/s to normal operating mode.
Loopback Mode
Perle C/CM-10GRT media converter modules can
be put into Loopback mode for diagnosis purposes.
A packet generator and analyzer must be used to
generator and capture the packets in this mode.