User Commands
148
IOLAN Device Server User’s Guide, Version 1.8
Start
Telnet
Description
Starts a predefined session. Only inactive sessions are displayed.
User Level
Restricted, Normal, Admin
Syntax
start 1|2|3|4
Options
1|2|3|4
The number of the session that you want to start.
Description
Starts a telnet session to the specified host/IP address.
User Level
Normal, Admin
Syntax
telnet <hostname/IP_address> [<tcp_port>]
[termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off]
[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]
[quit <00-7f>] [escape <00-7f>]
Options
<hostname/IP_address>
The name of the target host.
<tcp_port>
The port number the target host is listening on for incoming connections.
termtype
Type of terminal attached to this line; for example, ANSI or WYSE60.
line-mode
When
On
, keyboard input is not sent to the remote host until
Enter
is pressed,
otherwise input is sent every time a key is pressed. Default is
Off
.
map-cr-crlf
Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is
Off
.
local-echo
Toggles between local echo of entered characters and suppressing local echo. Local
echo is used for normal processing, while suppressing the echo is convenient for
entering text that should not be displayed on the screen, such as passwords. This
parameter can only be used when
Line Mode
is
On
. Default is
Off
.
echo
Defines the echo character. When Line Mode is On, typing the echo character echoes
the text locally and sends only completed lines to the host. This value is in hexadecimal
with a default value of
5
(ASCII value
^E
).
eof
Defines the end-of-file character. When Line Mode is On, entering the eof character as
the first character on a line sends the character to the remote host. This value is in
hexadecimal with a default value of
4
(ASCII value
^D
).
erase
Defines the erase character. When Line Mode is Off, typing the erase character erases
one character. This value is in hexadecimal with a default value of
8
(ASCII value
^H
).
intr
Defines the interrupt character. Typing the interrupt character interrupts the current
process. This value is in hexadecimal with a default value of
3
(ASCII value
^C
).
Summary of Contents for IOAN DS1
