15
Fast Blinking
z
The Power Supply Module is not
seated in the Chassis correctly.
z
A Power Supply Module has
been removed from the Chassis
without disconnecting the power
cable from the power connector
and the power switch is in the ON
position.
NOTE:
This is an indication of a
potential hazard. The power
switch should be immediately
turned off and the power
disconnected.
Note:
For your safety, before attempting to connect or
modify any of the electrical connections to the unit,
please be sure all wiring is disconnected from any
live power source. Power should only be applied
when you are sure that the wiring is correct and any
safety covers are properly installed.
Description
LED