Captive screws
Captive
retainer screw
18
as you might damage the module. If there is resistance, remove
the module and check the module’s backplane connector for
damage to the pins. If the module’s backplane conector is not
damaged, retry the insertion.
6.
Tighten the Captive retainer screw to ensure the Media Converter
Module is locked in place.
7.
Remove the dustcap from the fiber connector and connect the
fiber and copper cables.
Note:
All open slots in the Chassis must be covered with
a face plate in order to maintain proper air
circulation throughout the Chassis.
