background image

 

 

Perle MCR200 Guide

    

Technical Specifications  

 

Max Power Input/Consumption: 12 VDC/12 Watts 

Operating Temperature: 

0°C - 50°C (32°F - 122°F) 

Storage Temperature: 

-25°C - 70°C (-13°F - 158°F) 

Operating Humidity:  

5% to 90% non-condensing 

Storage Humidity: 

 

5% to 95% non-condensing 

Operating Altitude:   

Up to 3,048 m (10,000 ft) 

 

Weight without modules:  0.566 kg (1.25 Lbs.) 

Dimensions   

 

175 mm 145 mm by 23 m  

6.9” in. by 5.7” in. by .90” in. 

  

Compliance Information  

FCC 

This product has been found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions in this Guide, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference, in which case the user will be required to correct the interference at 
his/her own expense. 

EN 55022 Class A  

WARNING

 

This is a Class A product. In a domestic environment this product may 

cause radio interference in which case the user may be required to take adequate 
measures. 

EN 55024 Class A  


WARNING: Use of controls, adjustments or the performance of procedures other 
than those specified herein may result in hazardous radiation exposure. 

Summary of Contents for MCR200









Reviews: