Applications
27
Bridge Connection.
Once the link speeds have been configured, the P850 will attempt to
establish the link connection to the remote site PPP router.
The Bridge connection does not require any configuration for
operation.
IP Router Connection.
Once the link speeds and local IP address have been configured, the
P850 will attempt to establish the link connection to the remote site
PPP router.
The IP connection is an unnumbered connection that requires only the
configuration of the IP address of the P850.
IPX Router Connection
Once the link speeds have been configured, the P850 router will
attempt to establish the link connection to the remote site PPP router.
The IPX connection is an unnumbered connection that does not
require any configuration.
If security is required for the connection, refer to the Configure PPP
Security section for information on setting the security passwords and
user names for PPP.
The configuration options described here are only for initial set up and
configuration purposes. For more complete information on all of the
configuration parameters available please refer to the P850 PPP Menus
Reference Manual file on the accompanying CD-ROM.
Summary of Contents for PERLE P850
