2-2
Unit Description
2.2. RPS Series - Back Panel
As shown in Figure 2.2, the RPS Series Back Panel includes the following components:
1.
Power Circuit A - Power Inlet:
An IEC320-C20 AC inlet which supplies power to RPS
control functions and the Circuit “A” outlets. Also includes cable keeper (not shown.)
2.
Power Circuit B - Power Inlet:
An IEC320-C20 AC inlet which supplies power to RPS
control functions and the Circuit “B” outlets. Also includes cable keeper (not shown.)
3.
Power Circuit A - Switched Outlets:
AC Outlets that can be switched On, Off, rebooted
or set to default state in response to user commands:
4.
Power Circuit B - Switched Outlets:
Same as Item 3 above.
5.
Alarm Indicator Lights:
For future use.
6.
Network Port:
An RJ45 Ethernet port for connection to your 10/100Base-T, TCP/IP
network. Note that the RPS features a default IP address (192.168.168.168). This allows
you to connect to the unit without first assigning an IP address. Note that the Network Port
also includes two, small LED indicators for Link and Data Activity. For more information
on Network Port configuration, please refer to Section 5.9.
A1
A
B
A 2
A3
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
10/100 BaseT
ACT
A
B
ALARM
LINK
1
3
2
4
5
6
Figure 2.2: Back Panel (Model RPS1630H Shown)
