5-5
Basic Configuration
•
Log Configuration:
Configures the Audit Log, Alarm Log, Temperature Log and Current
Metering Log. For more information on the RPS's event logging functions, please refer
to Section 5.3.3. (Defaults: Audit Log = On without Syslog, Alarm Log = On without
Syslog, Temperature Log = On, Current Metering Log = On.)
Notes:
• The Audit Log will create a record of all connection/disconnection and login/
logout activity at the RPS unit.
• The Alarm Log is not used at this time and is reserved for future use.
• The Temperature Log will create a record of ambient rack temperature
over time.
•
Callback Security:
Enables / configures the Callback Security Function as described
in Section 5.3.4. In order for this feature to function, a Callback number must also be
defined for each desired user account as described in Section 5.5. (Default = On, Callback,
Without Password Prompt.)
Notes:
• In the Text Interface, Callback Security Parameters are defined via a submenu of
the Systems Parameters Menu, which is accessed via the Callback Security item.
• In the Web Browser Interface, Callback Security Parameters are defined via the
"Callback Security" link in the General Parameters fly-out menu.
•
Front Panel Buttons:
This item can be used to disable all front panel button functions.
(Default = On.)
•
Modem Phone Number:
When an optional external modem is connected to the RPS
Setup Port, the Modem Phone Number parameter can be used to denote the phone number
for the external modem. (Default = undefined.)
•
Scripting Options:
Provides access to a submenu that is used to configure the Command
Confirmation, Automated Mode, Command Prompt and RPS Mode parameters as
described in Section 5.3.5.
Note:
In the Text Interface, the Scripting Options submenu is accessed via item 12.
To access the Scripting Options parameters via the Web Browser Interface, place the
cursor over the "General Parameters" link, wait for the flyout menu to appear, then
click on the "Scripting Options" link.
•
Serial Number:
Allows the serial number for the RPS unit to be saved and displayed.
When this parameter is defined, the serial number can be displayed via the Product Status
screen in the Web Browser or by invoking the /J* command in the Text Interface. Since
the serial number plate on the RPS unit is not always easily accessible after installation,
it is often helpful to define the serial number here in order to simplify the process of
determining the serial number later. (Default = undefined.)