6-1
6. The Status Screens
The Status Screens are used to display status information about the switched outlets, Network
Port, plugs and Plug Groups. The Status Screens are available via both the Text Interface and
Web Browser Interface.
6.1. Product Status
The Product Status Screen lists the model number, power rating, input line count, input line
frequency and software version for your RPS unit. To display the Product Status Screen via the
Text Interface, type
/J *
and then press
[Enter]
. To display the Product Status Screen via the
Web Browser Interface, click on the "Product Status" link. The Product Status Screen lists the
following items:
•
Product:
The make/model number of the RPS unit.
•
Serial Number:
Displays the serial number for the RPS unit, providing that the serial
number has been previously defined via the Systems Parameters menu as described in
Section 5.3.
•
Rating:
The current rating, in Amps.
•
Line Count:
The number of power line inputs included on the RPS unit.
•
Branch Count:
The number of power branches present on the RPS unit.
•
Line Frequency:
The line frequency in Hertz.
•
SW Version:
The software version that is currently installed on the RPS unit.
•
RAM:
The amount of RAM memory installed on the RPS unit.
•
Flash:
The Amount of Flash memory installed on the RPS unit.
•
Breakers:
This field will read "Yes" if the RPS unit includes circuit breakers.
Note:
The Information provided by the Product Status Screen is intended mainly to
assist support peronnel with the diagnosis of user equipment problems.
