11-3
Command Reference Guide
11.3.
Command Set
This Section provides information on all Text Interface commands, sorted by functionality
11.3.1. Display Commands
/S
Display Plug Status Screen
Displays the Plug Status Screen, which lists the current On/Off state, plus the plug number,
plug name, Boot/Sequence Delay value and Default On/Off value for each plug. For more
information, please refer to Section 6.3.
Note that the /S command line can also include arguments that display On/Off status for an
individual outlet, two or more specific outlets, or a range of several outlets:
/S
Displays configuration details and On/Off status for all switched outlets.
/S
s
Displays On/Off status for an individual outlet, where
s
is the name or number of
the desired outlet.
/S
s
+
s
Displays status information for two or more specific outlets, where
s
is the
number or name of each desired outlet. A plus sign (
+
) is entered between each
outlet number or name.
/S
s
:
s
Displays status information for a range of outlets, where
s
is the number or name
of the outlet at the beginning and end of the range of desired outlets. A colon (
:
)
is entered between the two outlet numbers or names that mark the beginning of
the range and the end of the range.
Notes:
• In Administrator Mode and SuperUser Mode, all outlets are displayed. In User
Mode and ViewOnly Mode, the Plug Status Screen will only include the outlets
allowed by your account.
• The RPS will return a "0" to indicate that the plug is Off, or a "1" to indicate that
the plug is On.
Availability:
Administrator, SuperUser, User, ViewOnly
Format:
/S
[Enter]
/SG
Display Plug Group Status Screen
Displays the Plug Group Status Screen, which lists the available Plug Groups, the numbers of
the plugs included in each Plug Group, the current On/Off state, the user-defined Boot/Sequence
Delay value, and the Default On/Off value for each plug. For more information, please refer to
Section 6.4.
Note:
In Administrator Mode all user defined Plug Groups are displayed. In
SuperUser Mode, User Mode and ViewOnly Mode, the Plug Group Status Screen will
only include the Plug Groups allowed by your account.
Availability:
Administrator, SuperUser, User, ViewOnly
Format:
/SG
[Enter]