11-9
Command Reference Guide
/UL
Unlock Port (Invalid Access Lockout)
Manually cancels the RPS’s Invalid Access Lockout feature. Normally, when a series of failed
login attempts are detected, the Invalid Access Lockout feature can shut down the network
port for a user specified time period in order to prevent further access attempts. When the /UL
command is invoked, the RPS will immediately unlock all network ports that are currently in the
locked state.
Availability:
Administrator
Format:
/UL
[Enter]
Response:
The RPS will unlock all RPS RS232 Ports.
11.3.3. Configuration Commands
/F
Set System Parameters
Displays a menu which is used to define general system parameters. Note that all functions
provided by the /F command are also available via the Web Browser Interface. For more
information, please refer to Section 5.3.
Availability:
Administrator
Format:
/F
[Enter]
/P
Set Serial Port Parameters
Displays a menu that is used to select options and parameters for the RPS's serial Setup Port.
Note that all functions provided by the /P command are also available via the Web Browser
Interface. Section 5.8 describes the procedure for defining serial SetUp Port parameters.
Availability:
Administrator
Format:
/P
[Enter]
/PL
Set Plug Parameters
Displays a menu that is used to select options and parameters for the RPS's switched outlets
(plugs). Note that all functions provided by the /PL command are also available via the Web
Browser Interface. Section 5.7 describes the procedure for defining plug parameters.
Availability:
Administrator
Format:
/PL
[Enter]
/G
Plug Group Parameters
Displays a menu that is used to View, Add, Modify or Delete Plug Groups. For more information
on Plug Groups, please refer to Section 5.6.
Availability:
Administrator
Format:
/G
[Enter]