11-10
Command Reference Guide
/N
Network Port Parameters
Displays a menu which is used to select parameters for the Network Port. Also allows access to
the IP Security function, which can restrict network access by unauthorized IP addresses. Note
that all of the functions provided by the /N command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability:
Administrator
Format:
/N
[Enter]
/I
Reboot System (Default)
Reinitializes the RPS unit and offers the option to keep user-defined parameters or reset to default
parameters. As described in Section 5.10.1, the /I command can also be used to restore the unit to
previously saved parameters. When the /I command is invoked, the unit will offer the following
reboot options:
• Unit to Reboot
• Reboot Only (Do NOT default parameters)
• Reboot & Default (Keep IP Parameters)
• Reboot & Default (Default ALL parameters)
• Reboot & Restore Last Known Working Configuration
Availability:
Administrator, SuperUser
Format:
/I
[Enter]
/UF
Upgrade Firmware
When new versions of the RPS firmware become available, this command is used to update
existing firmware as described in Section 10.
Note:
When a firmware upgrade is performed, it will take about 15 minutes to
upgrade the RPS unit. Do not cycle power during the firmware upgrade.
Availability:
Administrator
Format:
/UF
[Enter]