1-2
Introduction
Four Different RPS Models
This User’s Guide discusses four different RPS models. Throughout this User’s Guide, all four
units are referred to as the "RPS". Aside from the hardware configuration, all other features
function identically in both units except where noted.
The table below summarizes the four RPS units covered in this manual:
•
RPS820:
Horizontal mount. Eight (8) switched, 208 to 240 VAC,
IEC-320-C20 outlets. 32 Amps maximum total load (de-rated.)
One (1) Rack Unit.
•
RPS830:
Horizontal mount. Eight (8) switched, 100 to 120 VAC, NEMA 5-15R outlets.
32 Amps maximum total load (de-rated.)
One (1) Rack Unit.
•
RPS1620H:
Horizontal mount. Sixteen (16) switched, 208 to 240 VAC, IEC-320-C20
outlets. 32 Amps maximum total load (de-rated.)
Two (2) Rack Units.
•
RPS1630H:
Horizontal mount. Sixteen (16) switched, 100 to 120 VAC, NEMA 5-15R
outlets. 32 Amps maximum total load (de-rated.)
Two (2) Rack Units.
Typographic Conventions
Throughout this manual, typefaces and characters have been used to denote the following:
COURIER FONT
Indicates characters typed on the keyboard.
For example,
/ON 3
or
/OFF 5
.
[Bold Font]
Text set in bold face and enclosed in square brackets indicates a
specific key. For example,
[Enter]
or
[Esc]
.
