S TEP 1
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER
INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.
If you do not understand the instructions or have any concerns or questions, please contact a qualified installer.
Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware included
must be used. If you require replacement parts, contact customer service at
This product has been designed for use on a vertical wall constructed of wood studs. Wood studs being defined as a
wall consisting of a minimum of 2” x 4” studs with a maximum of 1/2” of wall covering (drywall, lath, plaster).For
custom installations please contact a qualified installer. For safe installation, the wall you are mounting to must
support 4 times the weight of the total load. If not, the surface must be reinforced to meet this standard. The installer
is responsible for verifying that the wall structure/surface will safely support the total load.
WARNING
!
MEDIUM FULL-MOTION TV WALL MOUNT
Hardware Included
Extender Brackets
Wall plate and Arm
01
x2
02
x2
TV Screws / Washers
Washers
Ø
6mm
x4
A2
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M4 x 30mm
Spacers
L10mm
x4
x4
x4
Philips Screws
M8 x 15mm
M8 x 45mm
x4
x4
x8
E1
F
D1
D2
E2
B2
Spacers
L5mm
x8
C
Washers
Ø
6mm
M4-5-6
x4
B1
1
V2.0
03
x1
[S]
S2
[S]
S1
Level
Hardware
(
Wall /Product)
M8x65
Lag Bolts
x4
G
x8
H
x8
A3
x4
A1
Carriage
Bolts
M6 x 12
Nuts
M6
Wall
Anchor
CAUTION!
!
These anchors are for
concrete or brick walls
ONLY. DO NOT use them
in drywall or wood studs.
English ------------------ 01-04
Deutsch
Français ------------------ 09-12
------------------ 05-08
Español ------------------ 13-16
Italiano ------------------ 17-20
PSMFK1
supportus@perlesmith.com
supportus@perlesmith.com
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone:800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email:
supportus@perlesmith.com
(US/CA/DE/UK/FR/IT/ES/JP/AU)
Stud finder
Tape measure
Pencil
Drill
3/8 in. (10 mm)
1/8 in. (3.2 mm)
Wood Drill
Screw driver
Hammer
Socket wrench
3/8 in. (10 mm)
Concrete Drill
Tools Needed
(
Not Included
)
Using the Screwdriver , remove the screw
and washer
Keep screws for use in
Step 6
S1
S2
and separate the faceplate and the plastic parts from the bracket.