3B-1
3B-2
3B-3
A3
Position the wall plate at your desired
height, level the wall plate and mark the
pilot hole locations.
Install wall plate using lag bolts [A1], washers [A2] and anchors
[A3].
Be sure the anchors [A3] are seated flush with the
concrete surface. Tighten the lag bolts [A1] only until the
washers [A2] are pulled firmly against the wall plate[01] . DO
NOT over-tighten the lag bolts [A1].
Step 4 Mounting your TV to the Brackets
Use the hammer to knock
anchors [A3] into the wall.
6
A1
A2
A3
70mm
ø10mm
Drill 4 pilot holes using a 25/64 in.(10mm)
diameter drill bit.Make sure the depth is not
less than 2
3
/
4
in.(70mm).
Iocking
01
01
03
03
