Drill 2 pilot holes using a 4 mm
diameter drill bit. Make sure the
depth is not less than 50mm
Use a stud finder(not included)to
locate wood studs. Mark the edge
and center locations.
Position the wall plate[01] at your
desired height and line up the
holes with your stud center line.
Level the wall plate and mark the
holes.
Screw the lag bolts [A1] into
the pilot holes using wrench
[02] until 4mm of the bolts are
left.
1A-1
1A-2
1A-3
50mm
4mm
4mm
A1
02
