Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
10
48” TWO DOOR AND DUAL-ZONE REFRIGERATOR/WINE RESERVE
Operation/Installation Manual
NOTE: The colder temperature setting must always be applied to
the compartment on the left. A minimum temperature difference
of 6° between the left and right compartments is required.
Example: 42°
Left compartment and 48° right compartment is
achievable. 40° Left compartment and 44° right compartment
is
not
achievable.
LED Functions
The following table describes LED functions
LED
Mode
Function
ON
Compressor is on
Flashing
Delay, protection or
Blocked start-up
ON
Defrost is on
Flashing
Manual or D.I. activation
ON
Alarm is on
Flashing
Alarm acknowledged
ON
Evaporator is on
SELECTING APPLICATIONS
The procedure for loading one of the default applications
is:
1. At start-up of the device, keep the
key pressed:
the label “AP1” will appear;
2. Browse the various applications (AP1-AP2-AP3-AP4)
using the
and
keys;
3. Select the desired application using the
key
(“AP3” in the example) or cancel the procedure
by pressing the
key; alternatively wait for the
timeout;
4. If the operation is successful, the display will show “y”,
if not it will show “n”;
5. After a few seconds the instrument will return to the
main display.
Power-on +
Selecting Applications
HC48
48” Application Temperatures
Model
AP1
AP2
AP3
HC48RW
HC48WW (Zone 1)
Refrigerator
(36°F)
N/A
Wine Reserve
(55°F)
HC48RW (Zone 2)
Red Wine
(55°F)
White Wine
(45°F)
N/A
HC48RS Models
Model
Temp Range
Factory Set Point
HC48RS4
34° F (1.1°)
42°F (5.6°)
HC48WS Models
Model
Temp Range
Factory Set Point
HC48WS4
34° F (1.1°)
68° F (20°)
HC48RW Models
Model
Temp Range
Factory Set Point
HC48RW4
Left 32° F (0°)
Right 40° F (4.4°)
Left 42° F (5.6°)
Right 68° F (20°)
HC48WW
Model
Temp Range
Factory Set Point
HC48WW4
43° F (6.1°)
54° F (12.2°)
NOTE: An audible alarm will sound on any alarm condition.
To silence the active alarm press and release any key on the
controller. See the troubleshooting section for description of
alarm codes and resolutions.
