Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice
7
Form No. Z2426
Rev. 03.04.2022
48” TWO DOOR AND DUAL-ZONE REFRIGERATOR/WINE RESERVE
Operation/Installation Manual
SEALING THE CABINET
NOTICE
Finished flooring should be
protected with appropriate
material to avoid damage from moving the unit.
NOTICE
If unit has laid on its back or sides,
place unit upright and allow
minimum of 24 hours before connecting power.
NOTICE
To prevent damage to the counter
top and unit underneath, do not
place heavy objects on the counter top directly above
the unit
For sanitation purposes, it may be necessary to seal the
base of the cabinet to the floor. This can be accomplished
by laying a bead of silicone sealant between the base of
the cabinet and the floor as shown by the figure below.
When sealing the cabinet to the floor, make sure that
the louvered front grille plate can still be removed for
condenser maintenance and cleaning
Plug the unit into the 15amp grounded outlet located
in the installation opening. With power applied to the
unit, check that lighting and cooling function operate
properly, then turn off power to wall outlet at the circuit
breaker.
Check interior door openings inside the unit to ensure
the unit is level
22-1/32”
23-3/16”
1-3/4”
5/16”
1/2“ to hole
3/16”
15/16”
3/16”
48” Anti-tip Kit
