Playpen Barrier User Guide
4
General Assembly
2
3
To Remove Unwanted Panels
Turn base knob to the unlocked position, pull up on the corner tube and slide the bottom of the corner
tube out from the base. With the corner tube removed you can lift and remove the unwanted panel.
Locked
Unlocked
1
Select the appropriate fixing method from the following list. This barrier must only be fixed to a
solid and secure surface. To install you will need a Phillips screwdriver, pencil and drill.
Timber
Plasterboard
Hard wall
Timber Fixing
Drill 2mm pilot holes and
use the timber screws
provided screwing directly
into the timber.
Hard Wall Fixing
(Concrete or Brick)
Hard wall surfaces require
expandable wall plugs (not
supplied), these are available
at all DIY retailers.
Plaster Board Walls
Locate timber stud and
follow timber fixing
instructions. Plaster board
walls without studs require
expandable wall plugs (not
supplied), these are available
at all DIY retailers.
If unsure, check with a qualified builder or tradesperson that the installation you intend is
suitable and safe within the chosen location.
Summary of Contents for Playpen Barrier
Page 16: ......