4.Take the base, connect the
extension into base recess
and base.
5. Take the back grill (part
grill and fan body.
6. Put the blade (part 3) to the
7. Make up the front grill (part
OPERATION
•
For the two buttons on the control panel:
Lamp
.
Fig 2
4.Take the base, connect the wire terminal between fan body and base.
recess, tightening 4 screws (from poly bag) to f
(part 5) out and tighten the big plastic nut (part
) to the motor shaft, tightening blade nut (part 2
(part 1) and back grill together and press down
s on the control panel: the left is for the Fan, and
Fig 3
between fan body and base. Put the
(from poly bag) to fix the expansion
(part 4) to fix the back
2)
press down the buttons.
, and the right for the
