© 2004 Perma Green Supreme, Inc. All rights reserved.
DOCUMENT ID: U005M
Replacing the Hopper
1 Remove the (4) 7/16” nuts
2 Remove shoulder bolt connecting the slide plate to the hopper linkage
3 Lift hopper off frame
4 Remove right side pattern adjusting cable
5 Install new hopper on frame
6 Replace and tighten the (4) 7/16” nuts
7 Replace the shoulder bolt
8 Replace the right-side pattern adjusting cable
TOOLS
7/16” nut driver
3/8” wrench
1/8” Allen wrench
Phillips head screwdriver
Pliers
Replace Deflector Lever & Cable
1 With 1/4” wrench, loosen stop nut (A) to allow you to disengage wire from control arm
2 With 7/16” wrench and Phillips screwdriver, remove and replace lever (B)
3 Re-engage wire and tighten stop nut
TOOLS
7/16” nut driver
3/8” wrench
Phillips head screwdriver
page
5
