Contact for rear light
8
Covers
Removal
1.
Raise the seat to its highest position, se
page 7.
2.
Remove the top cover. It is held in place by
Velcro tape, so it just needs to be pulled
upwards.
3.
Then remove the chassis cover. It is held in
place by four screws.
4.
Open the electronics box and disconnect
the contact for the rear light.
5.
Finally, remove the two front covers. They
are each held in place by two screws.
Fitting
1.
First fit the two front covers.
2.
Then reconnect the cable for the rear light
and close the electronics box.
3.
Fit the chassis cover.
4.
Refit the top cover. Press the Velcro tape
firmly in place.
Covers
