Page: 5/15
Programming manual
C
ompact
J
oystick
A
dvanced R-net
Document Number: 205314-UK-0 Edition 2 2009-10 (0033-8009a-0100a)
4.2.1 Outputs
It is possible to control 16 output channels with the CJA-RNET. They are divided into 4
groups (Group 1 ... 4). Each group contains 4 outputs (Output 1... 4).
Defaults:
Group 1 – output 1:
Drive Axis 1
Group 1 – output 2:
Drive Axis 2
Group 1 – output 3:
Drive Axis 3
Group 1 – output 4:
Drive Axis 4
Group 2 – output 1:
Running Lights
Group 2 – output 2:
Hazard Lights Indicator
Group 2 – output 3:
Left light Indicator
Group 2 – output 4:
Right light Indicator
All
others:
Off
4.2.1.1 Group 1 ... 4
Sets the functionality of the output
Each group contains 4 different outputs. Each output can have a different function. The
groups are displayed vertical, the outputs in each group horizontal.
Off:
The
output
is
disabled.
Drive Axis:
Allows you to control the selected axis by moving
up/down your joystick lever. Depending on the value in
‘group 1 ... 4 Drive Axis’ you will operate a different axis.
Running Lights:
Allows you to switch on/off you running lights of your
wheelchair.
Hazard Lights Indicator:
Allows you to switch on/off your hazard lights indicator of
your wheelchair.
Left light Indicator:
Allows you to switch on/off your left light indicator of your
wheelchair.
Right light Indicator:
Allows you to switch on/off your right light indicator of
your wheelchair.
Toggle Auto Control:
Allows you to switch on/off your auto light and/or auto
horn control if they are activated.
Horn:
Allows you to operate your horn.
