background image

Warnings - Please read carefully

Care of your

 

LapStacker

 

®

Warnings - Wheelchair Guidelines & Vision

 

Please do not exceed your wheelchair manufacturer’s guidelines for loading or usage 

of attachments.

 

Please do not stack items too high on your lap so as to reduce your ability to see 

where you are going. This could result in a collision that causes you or others an 

injury.

Warnings - Installation

 

If you are installing the LapStacker

®

 and moving existing components around such as 

arm rests or leg restraints please ensure they are reinstalled and secured correctly. 

Failure to do so may result in their failure and injury to you or others.

 

The Brackets are made of plastic to reduce weight and are not designed to be pulled 

on or adjusted without first loosening the fasteners. Please be gentle with them or 

they may break.

 

Wipe components clean with a damp cloth and avoid the use of chemical detergents 

which may damage the plastic surfaces. 

 

The LapStacker

®

 Retractor has not been designed for submersion in water. Doing so 

will likely result in rusting of the internal components and may void your Warranty. 

 

The straps may be cleaned using water and a damp cloth. We suggest removing the 

retractors, fully extending the straps and letting them dry before retracting the straps 

back into their housing again.

4

Summary of Contents for LapStacker XD Power











Reviews: