ROHO AGILITY CARBON Contour Back Support Operation Manual
12
Cover Removal and Installation
Warnings:
-
DO NOT remove or install the cover while the individual is in the wheelchair.
-
DO NOT use the product without the cover, the foam pad, and the air insert or foam insert.
-
Inspect the cover for damage and replace if necessary.
To Remove the Cover:
1. On the back and bottom side of the shell, pull
the cover flap to release the cover from the
fastener strip.
2. Pull the cover away from the shell, releasing it
from the fastener strips on the front side.
3. Flip the cover over the top of the shell. Release
the attachment flap from the fastener strip. Pull
the flap through the cover attachment slot to
remove the cover.
To Install the Cover:
1. At the top of the shell, slide the attachment flap
through the cover attachment slot. Press the
fastener strip on the shell and the attachment
flap together to secure the cover. Flip the cover
over the top of the shell.
2. Fold the cover flap over the top of the shell and
press to fastener circles. Make sure the zipper
side of the cover faces the shell, and press to
attach the cover to the fastener strips on the
front side of the shell.
3. Pull the bottom end of the cover over the
bottom edge of the shell. Press the fastener
strip on the shell and the cover flap together to
secure the cover.
