User manual PE 800 |
©
copyright PERPETUUM EBNER 2018
8
When using other pickup cartridges or other platter co-
vers than the felt mat provided the height of the tone
arm may be adjusted. To this, you can loosen both
screws at the tone arm socket using a hex key SW3, and
adjust the height of the tone arm.
Please hold the tonearm in place after having loosened
the screws in order to make sure that it does not slide
down into the chassis.
Slightly tighten the bolt after having adjusted the height
(see fig.
F 3
).
F 3
– Adjusting the tone arm height
