3)
Locate and remove OEM horn on lower radiator core support. You will re-use 12mm bolt (not the nut) in future steps.
4)
Consult Hella Horn instructions to determine how they need to be electrically installed.
Note: Do this step before mounting bracket to car as this will allow for
easier way to connect both horns electrically. OEM horn wires can be used to trigger aftermarket horn relay but can’t be used to drive horns directly.
5)
Remove flat brackets from Horns if they are already installed. The nuts on these are very tight and may require a vice to hold bracket while loosening.
6)
Install horns to PERRIN Mount using supplied M8 washers behind nuts.
7)
Install PERRIN Horn bracket and secure to car using 12mm bolts removed earlier.
8)
Make any final adjustments to horn location and tighten 13mm nuts securing horns to bracket.
9)
Connect horns electrically following diagrams supplied with horns.
10)
Test to ensure horns function as desired.
11)
Reinstall bumper making sure to plug in fog light connectors.
For questions & comments please contact
503-693-1702
See Website For Instant Chat Options
