e bunt.doc
Rev. 14.06.2010
Seite /
Page
38 / 40
Perrot REGNERBAU CALW GmbH
Industriestraße 19-27 / D-75382 Althengstett / Germany
Telefon : 0049-7051-162-0 / Fax : 0049-7051-162–133
E-mail : perrot@perrot.de
/ E-mail Konstruktion : technik@perrot.de
10.2
Fitting manual opening and pressure regulating inserts
Set manual opening to Auto and pressure regulator into the minus (-) position (turn to
the left as far as it will go) and screw in using an SW19 flat spanner.
Clip control unit into protective casing.
Secure housing cover using all three screws.
Check sprinkler is working properly as per points 5b - 5e.
Set manual opening / pressure regulator screws to desired position.
11
Maintenance
Cut sprinkler housing free of any overgrowing grass. It makes sense to do this work
with the cut off tool (see chapter 4 for the order number) before starting up the system
in spring.
