5 - INITIAL OPERATION
A) First time switching on the device
When powered for the first time, some segments on the time display will be off. To activate them, lightly press the
using a
thin object. After having performed the test cycle, the device will be ready for
entry.
RESET key
current hour
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
B) Switching on the device subsequent to the first time
The time switch presents itself in normal operation (backlit display with segments on). If you wish to fully program it, simulta-
neously press
and
and
. After having performed the test cycle, the device will be ready
for
entry.
OK
PROG
current hour
keep pressed for 3 seconds
Day
Ok
Prog
1
Delete
Important:
the following meanings are adopted in
the instructions.
Characters
permanently
alight:
Characters
blinking:
1 2 3 4 5 6 7
NOTE: in the absence of
mains power supply, the
device will switch off
display backlighting and
deactivate the relay.
Ok
Prog
Delete
Keep pressed
for 3 sec.
Re-start can always be performed by pressing
with a thin
object. In this case, operating programs entered will not be lost.
RESET
1 2 3 4 5 6 7
1 2 3 4 5 6 7
Day
Ok
Prog
1
Delete
19
EN
Summary of Contents for 1IO 6081
Page 68: ......
