INSTALLATION: system set
refer to the APP manual
to download the APP:
Perry Timer
CONTROLS AND SIGNALS
CONNECTION OF THE Wi-Fi DEVICE TO THE APP
Log in to the App with the personal credentials. If you do not have the credentials, register (see the APP manual)
Note: in case of problems with the Wi-Fi network, it will also be possible to associate the device to the APP using the AP mode
(see description in the APP manual)
SIMPLIFIED EU DECLARATION OF
CONFORMITY
The manufacturer declares that the type of radio
equipment indicated below complies with
Directive 2014/53/EU (RED).
The full text of the EU declaration of conformity is
available at the address shown on the label:
Via MILANESE, 11 - 22070 VENIANO (Como)
ITALY - www.perry.it
Tel. +39-031-8944.1 Fax +39-031-931848
V001
PERRY ELECTRIC S.r.l.
Manufacturer, Fabricat, Fabrikant, Fabbricante, Fabricante:
Type, T
, Tipo:
ypen
http://www.perry.it/it/dichiarazioni.aspx
Series, serie:
Programmable even without
an internet connection
using a shared Wi-Fi network
ROUTER
INTERNET
Wi-Fi
EN
4
The button to manually control
the Wi-Fi time switch
- quick press:
command to switch the relay
status (ON / OFF)
-
pressed for 5 s
("rst switch-on) command to
search for a Wi-Fi network to
connect to.
-
pressed for 5 s
(device already connected to
the network) RESET
command.
The blue status LED of the Wi-Fi network
INSTALLATION
1IO0057WF
1IO0057WFF
1IO0057WFGB
1IO0057WFD
IMPORTANT!
the
must be carried out in the
FIRST CONNECTION
presence of a Wi-Fi network connected to the Internet.
Red relay status LED
indicates whether the relay is on
or off.
When the relay is ON, the LED
will be on;
when the relay is deactivated, the
LED will be off.
Waiting to connect
to the Wi-Fi network
Device status
LED signal
&ashing fast
off
Connected
to the Wi-Fi network
Problems
with the Wi-Fi network
"xed
i
Follow the procedure of the APP step-by-step and associate the Wi-Fi time switch to the App: «Add device»
Once the association of the Wi-Fi device has been con$rmed, proceed with the programming as described in the APP manual.
RESET
OPERATION WITH NO POWER
To reset the Wi-Fi time switch to the factory settings, run the Reset function by
keeping the button on the front of the Wi-Fi time switch pressed for 5 seconds.
IMPORTANT: the time switch
, all
loses the association with the APP
programming is deleted and the device is set back to the factory default settings.
Note: it will also be possible to delete the programming and/or association of
the device from the APP (see APP instructions).
IMPORTANT! It is recommended for the installer or expert user to perform the
RESET as this deletes any previous settings and programs.
If the 230V~ power is disconnected (e.g. a blackout), the time switch disables the relay.
The language, programs and all previously entered settings are saved in a permanent memory.
Update of the current date and time will not be guaranteed.
When power and the internet connection return, the current date and time will be automatically updated.
RESET:
Press and hold the button
at the front for 5 seconds
5
Attention: if the Internet connection is deactivated when power returns, the time switch will not run the
programs. Restore the Internet connection.
