7
6.
Contacts check
AB++ allows you to easily check, whether the trigger contacts in the gearbox or the button on the unit
are functioning properly. When the unit is connected to the battery, but disconnected from the motor,
it informs about this with yellow, flashing light. If during that time, a properly working and connected
trigger contacts will be closed, or the button on the unit will be pressed, the unit will signal that by
changing the LED color for a moment.
Attention!
To enter Contacts check mode, the motor must be disconnected first, only then connect the
battery!
Attention!
After you enter the switch check mode, it will be active for 5 minutes, after which the unit
will shut down. To restart it, simply reconnect the battery.
LED color
Switch
Disconnected motor /
Contacts check
Yellow, blinking
No switch activation is being detected at this moment
Trigger
Purple
Trigger contacts are closed.
Button on the unit
Green
Button on the unit is being pushed.