STABL
E
STABL
E
Totalizing of single quantities:
(
If a container is used, note „Weighing with container“)
If is displayed, the previous totalizing must be deleted:
Push key, then the key.
Place 1st quantity on the scale; wait until
is displayed.
Push key.
Memory space # 0001 is displayed, followed by the current weight.
Place 2nd quantity on the scale; wait until
is displayed.
Push key.
Memory space # 0002 is displayed, followed by the total weight. After 2 sec. the
current weight is displayed.
Max. 9999 quantities can be totalized.
Display of the totalized weight:
Push key.
The number of quantities and the totalized weight is displayed.
Delete the current totalized weight:
Push key, followed by key.
Check weighing mode
(without tolerance range):
The scale is preset to a selected weight.
When the selected weight is reached, an acoustic signal is generated.
Preset the weight:
Push key. Display: flashing.
Select with key the desired digit
Display (after 1st selection):
Select with key the value of the desired digit (0
– 9).
After input of the last digit (xxxxx.
0
) push key.
Display: flashing.
Push key. Display: 0.0 g
Function:
Place the material on the platform.
Once the selected weight is reached, an acoustic signal is generated. Display:
Deactivate the function:
Push key, followed by key.
Push key 2 times.
For further functions and system parameter setting, note the instruction manual.
M+
.
.
.
