11
11
IMPORTANT!
If the sealing ring is missing from the lid of the feeding bottle there is
no vacuum, hence no suction. The same occurs if the lid of the feed-
ing bottle is not screwed onto the bottle. The feeding bottle must be
vertical during operation.
WHAT TO DO IN THE CASE OF MALFUNCTION
If there is no suction
• check the lid is properly closed
• check the silicone tube connections are properly sealed.
If the vacuum pump does not work check there is voltage in the wall sock-
et. If a fault or malfunction occurs turn off the device and detach the adapter
from the mains. Repairs to the vacuum pump can only be performed by
the manufacturer.
USING THE NOSE CLEANING DEVICE:
We distribute the nose-cleaning device with two types of probe heads.
• We recommend the probe head with the cone end for general use. With
this device the nasal cavity can be cleaned thoroughly. Sit the baby up
in your lap. Place the nose-cleaning probe in one of the child's nostrils.
The join of the nostril and probe should be airtight and you should
block the other nostril with your finger. If you place the probe into the
nostril correctly, mucus should appear in the probe within a few sec-
onds. You should perform this operation on both nostrils.
• The nose probe with the silicon tube with a collar is for the suction
of visible (fluid or clotted) mucus. Sit the baby up in your lap. Place
the nose cleaning probe in the nostril in such a way that the end of
the short silicon tube with the collar should reach into the mucus.
The mucus will appear in the probe within a few seconds. You should
perform this operation on both nostrils.
ENGLISH
tej 01 HED.qxd 2008.05.21. 8:29 Page 11 (Black plate)
