VERIFY PACKAGE CONTENTS.
(1) PetChatz PawCall
®
(1) Bluetooth USB Dongle Adapter
*Not included: 2 AA batteries and 3M Command
TM
Strips
INSERT THE USB DONGLE ADAPTER
INTO YOUR PETCHATZ UNIT.
A.
Remove the white cover from your PetChatz
unit and remove your PetChatz unit from
the mounting bracket. On the left side of
your PetChatz unit, locate the top, open USB port.
B.
Holding PetChatz with the USB port facing up, insert the Bluetooth USB Dongle
Adapter into the open USB port. You will know the USB Dongle Adapter is properly
seated in the port when you see the USB Dongle Adapter shows a solid blue light
when PetChatz is powered on.
INSERT BATTERIES INTO PAWCALL.
A.
Remove the black PawCall button dome by inserting
a flathead screwdriver into the side indents of the
dome to release the two side dome latches.
B.
Insert 2 AA batteries into the battery clips.
C.
Replace button dome, making sure the dome
guide pin located at the bottom of the dome is
aligned with the pin depression on the base.
CONNECT PAWCALL TO PETCHATZ.
A.
Once batteries are inserted, PawCall will
automatically start to blink which indicates
it is in
Connection Mode
.
B.
On your PetChatz unit, press and hold the
manual treat button for 3 seconds to display
the menu, then select “PawCall” and
“Connect to PawCall”.
C.
You will receive a “Connected” message on
your PetChatz screen when the connection
process is complete.
How to Set Up
CALL MODE
Allows your pet to send you
a message that they want to chat!
• Call Mode can be pre-scheduled to
occur once or twice daily.
• When Call Mode begins, PetChatz
will alert your pet with the PawCall
chime and PawCall will blink.
• When your pet presses the PawCall
button, (1) PetChatz will dispense a
treat, (2) PawCall will stop blinking
and exit Call Mode, and (3) you will
receive a message that your furry
friend wants say hi.
GAME MODE
An interactive game for your pet to play
while you are away!
• Game Mode can be pre-scheduled to occur once
or twice daily.
• When Game Mode begins, PetChatz will alert your
pet with the PawCall chime and PawCall will chime
and blink at random intervals for a period of 5 minutes.
• When your pet presses the PawCall button,
(1) PetChatz will dispense a treat, and (2) PawCall
will stop blinking for a randomized period of time.
• Approximately 25 treats will be dispensed during
each 5-minute Game Mode session.
SECURE PAWCALL TO THE FLOOR.
Secure your PawCall on the floor within two feet of your PetChatz unit. We recommend
using large picture hanging 3M Command
TM
Strips to adhere to a hard floor or carpet.
SCHEDULE CALL MODE AND GAME MODE.
A.
Log into the PetChatz app.
B.
Select Settings and then select PetChatz Unit Settings.
C.
Select PawCall and follow the onscreen instructions.
i
HINT:
When your batteries expire and/or your PawCall is positioned out of range of your
PetChatz, your PawCall will show up as “Disconnected” on the PetChatz unit menu screen
under PawCall. To access the menu, push and hold the manual treat button.
1
2
3
4
5
6
DOME
GUIDE
PIN
COMMAND
STRIPS
support@petchatz.com
