background image

TO ENSURE YOU ARE USING THIS BAR WITH OPTIMUM SAFETY AND COMFORT, 

YOU MUST HAVE COMPLETELY READ AND FULLY UNDERSTOOD THIS MANUAL 

PRIOR TO USING THIS PRODUCT.

REGULARLY CHECK OUR WEBSITE FOR PRODUCT UPDATES.

1

1

1

2

4

7

3

7

3

8

16

15

8

16

15

6

10

17

14

5

12

13

18

19

20

21

22

23

11

9

  1.  Rear line attachment loops

  2.  Top line attachment knots

  3.  Rear leader lines (top part)

  4.  Adjustment to set difference 

between top & rear lines.

 5. Safety leash

  6.  Power adjustment strap

  7.  Self landing handles with 
 

  safety leash attachment

  8.  Rear leader lines (lower part) 

with fl oats

 9. Leash positioning pieces

 10.  Bowline knot connecting adjust-

ment strap with depower line 
(with neoprene cover)

 11.  Leash side connector (for 
 

  guiding the leash to the side)

12 .  Center leash connection piece 

(for guiding the leash through 

  

the 

center) 

 13.  Stopper  ball  with  screw

 14.  Allen  key

 15.  Bungee loops for line storage

 16.  Endcaps

 17.  Depower  line

 18.  Carbon bar with center hole

 19.  Leash  quick  release 
  

(secondary 

release)

 20.  Release cuff (for activating 
  

primary 

release)

 21.  Spinning  safety  leash 
 

  attachment on depower loop

 22.  Depower  loop

 23.  Removable depower loop lock

Summary of Contents for Zero 7 Pro Carbon Bar









Reviews: