To reduce the overall power of the kite:
Pull the part of the webbing loop coming out of
the bottom of the clip towards you.
To increase the overall power of the kite:
Pull the part of the webbing loop attached to the
small ring on the top of the clip. Pull this end of
the loop towards you and release.
Extra features
Power adjuster
The power adjuster enables you to adjust the overall power of the kite.
Depower loop lock
When using the depower loop lock it ensures that the
depower loop stays hooked in when the tension is off your
top lines. To use the depower loop lock, after hooking in
stick the small piece of tube through your harness hook,
so it sits under your depower loop.
To remove the depower loop lock, undo the Velcro on the
depower loop lock.
Self landing handles
For easy self landing of the kite, you can use the self landing
handles. Grab the handle and unhook your depower loop or
activate your depower loop quick release.
After using the self landing handles, pull back the line through the
ring on the lower part of the leader line and set the self landing
handles back in place by wrapping the Velcro around the lower part
of the leader lines.
Caution!
5
When self landing while unhooking
your depower loop grab the self landing
handle without the leash attached to it!
When self landing while activating your
safety system grab the self landing
handle where the leash is attached to!
