JUMP STARTING VEHICLES
7.
If either vehicle is equipped with
battery disconnects ensure they
are in the
"OFF"
position prior to
connecting the two vehicles.
Connect the batteries:
1.
Attach one end of a jumper cable
to the
positive (+)
terminal of the
discharged (dead) battery. This
will have a large
red +
or
P
on the
battery case, post, or clamp.
2.
Attach the other end of the same
cable to the
positive (+)
terminal
of the good (booster) battery.
3.
Attach the remaining jumper cable
FIRST
to the
negative (-)
terminal
(black or N)
of the good battery.
4.
Attach the other end of the
negative cable to a bare metal part
not bolted to the engine block.
NOTE
Always connect positive (+) to
positive (+) and negative (-) to
negative (-).
5.
If either vehicle is equipped with
battery disconnects, ensure that
they are in the
"ON"
position.
6.
Start the vehicle that has the
good battery first. Let it run for 5
minutes.
7.
Start the vehicle that has the
discharged (dead) battery.
If the engine fails to start, do not
continue to crank the starter but
contact the nearest authorized dealer.
(03/17)
Y53-6076-1B1
2-13
2
https://www.besttruckmanuals.com/
Summary of Contents for 365 2017
