11
S.P.O.T.™
collars are equipped with rechargeable
Nickel Metal Hydride (NiMH) batteries, which are not
memory sensitive and do not require depletion before
recharging. Although batteries come partially charged
from the factory, it is recommended that they are given
a full charge (up to 12 hours) before initial use.
* The transmitter uses a 9-volt replaceable battery (not
included). Be sure to pay attention to the “+” and “-”
terminals when inserting the battery.
NOTE:
Rechargeable batteries typically last about 2-5 years
on average depending on use and care. Keep batteries
away from flammable substances. DO NOT OVERCHARGE.
See
page 17
for more information on battery maintenance.
CHARGING THE COLLAR BATTERIES
Battery Charging Procedure
1. Make sure the unit is off.
2. Plug the wall charger into a
standard electrical outlet.
3. Connect the single-jack cable to the charger and
plug the end into the collar receiver. The
SmartLED™ should light solid
red
while charging.
4. Charging is complete when the SmartLED™ turns
green
(may take up to 12 hours).
5. When charging is complete, disconnect the battery
charging cable from the receptacle, securely replace
the rubber charging receptacle cover, and test unit.
WARNING: DO NOT CHARGE WHILE UNIT IS WET!
