8
there is a very great risk of an
electric shock.
●
The replacement of the plug at the
mains lead has to be done according
to the following instructions:
Important:
The wires in this mains
lead are coloured in accordance with
the following code:
blue:
Neutral
brown: Live
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
- the wire which is coloured blue
must be connected to the terminal
which is marked with the letter N or
coloured black,
- the wire which is coloured brown
must be connected to the terminal
which is marked with the letter L or
coloured red.
Do not connect any wire to the
terminal which is marked with the
letter E or by the earth symbol , or
coloured green or green and yellow.
●
If a 13 A (BS 1363) plug is used it
must be fitted with a 3 A fuse
conforming to BS 1362 and be ASTA
approved. If any other type of plug is
used, the appliance must be proctec-
ted by a 5 A fuse either in the plug or
adapter or at the distribution board. If
in doubt - consult a qualified
electrician.
●
Never use the plug without closing
the fuse cover.
The appliance complies with the
EC regulations no. 73/ 23 EWG
and no. 89/ 336 EWG.
Subject to technical changes.
Proper dispose of the packaging
material.
