Rebooting Mousr
If you need to reboot Mousr, you can manually enter device recovery mode by
holding his pushbutton for 15 seconds
. After holding the button for 15 seconds,
his LED will flash red, and once you release his pushbutton he will enter device
recovery mode. In device recovery mode, click his pushbutton once more to reboot
back into normal mode.
During normal operation, an unexpected system crash may cause Mousr to enter
device recovery mode without any user input. If this happens, simply click his
pushbutton to reboot into normal mode as described in the previous paragraph.
If Mousr is in device recovery mode and his LED continues to glow white even after
you click his pushbutton, you can try reloading the latest firmware as detailed in
the next section.
Reloading firmware
If Mousr is in device recovery mode, you can manually reinstall the latest firmware
from the mobile app by following these steps.
•
Open the app. (Any Mousr in device recovery mode should not show up in the
device list. If you are sure Mousr is in device recovery and it is showing up in the
device list, try completely closing the app and re-opening it.)
•
Click “Skip” on the device list to continue to the home page without connecting.
•
On the home page, click Help -> About -> Firmware Version -> Device
Recovery.
These steps are shown in the images below.
Mousr User Guide
Version 1.0 [Rev. 6/04/18]
14
