Petsafe Deluxe In-Ground Radio Fence, Operating And Training Manual

20 

1-800-732-2677

To Locate a Break in the Boundary Wire

Please follow these steps in determining where you have a break in your Boundary Wire:
1. Locate your original splice(s) and verify they have a good, solid connection.
2. Check your yard to determine any possible damage to the Boundary Wire (e.g. recent digging, aerating, rodent 

burrowing, or any other noticeable disturbance in your yard next to the Boundary Wire).

If you still cannot fi nd the break in the Boundary Wire, there are two options for locating it:

Option 1:

 Contact the Customer Care Center at 1-800-732-2677 to purchase a Wire Break Locator that will locate 

the break in the Boundary Wire. 

Option 2: 

Follow the procedure below:

1. Unplug the Fence Transmitter.
2. Connect both ends of your twisted Boundary Wire to one Boundary Wire 

Terminal.

3. Measure and cut a Test Wire which is half the length of your total Boundary 

Wire footage.

4. Connect one end of the Test Wire to the other Boundary Wire Terminal.
5. Locate the halfway point of your boundary and cut the Boundary Wire.
6. Splice the other end of the Test Wire to either side of your Boundary Wire where 

you cut it in half.

7. Plug in the Fence Transmitter and check the Loop Indicator Light. If the 

Loop Indicator Light is on you can assume the break is in the other half of the 
Boundary Wire.

8. If the Loop Indicator Light did not come on, you may assume there is a break in

Ground

Wire

Test

Wire

this portion of the Boundary Wire. However, there is a small chance of having more than one break in your 
system. Be sure to check both halves of your entire loop.

9. Replace the damaged Boundary Wire with new Boundary Wire. 
10. Reconnect the Boundary Wire to the Fence Transmitter.
11. Check the Loop Indicator Light. If the Loop Indicator Light is on, test the system with the Receiver Collar.

________________________________________

Terms of Use and Limitation of Liability

1. Terms of Use

This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions 
and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices. 

2. Proper Use

This Product is designed for use with pets where training is desired. The specific temperament of your pet may 
not work with this Product. We recommend that you not use this Product if your pet is less than 8 pounds 
or if your pet is aggressive. If you are unsure whether this is appropriate for your pet, please consult your 
veterinarian or certified trainer. 

  Proper use includes reviewing the entire Guide provided with your Product and any specific Caution statements.

3. No Unlawful or Prohibited Use

This Product is designed for use with pets only. This pet training device is not intended to harm, injure or 
provoke. Using this Product in a way that is not intended could result in violation of Federal, State or local laws.

4. Limitation of Liability

In no event shall Radio Systems Corporation be liable for any direct, indirect, punitive, incidental, special or 
consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this 
Product. Buyer assumes all risks and liability from the use of this Product.

5. Modification of Terms and Conditions 

Radio Systems Corporation reserves the right to change the terms, conditions and notices under which this 
Product is offered.