8
Customer Care Center 1-800-732-2677
Set Timer 2 Off/On
1. Press the “SELECT” button until Timer 2 OFF
(6) appears in the
LCD.
Note: After setting the Timer 1 the menu will default to Timer 2 OFF.
2. Press and release the “HR” button once and “12:00AM”
(7) will flash.
3. Press and release the “HR” button to the correct hour; be sure to note
the correct AM/PM setting.
4. Press and release the “MIN” button to the correct minutes.
5. Press and release the “SELECT” button to confirm the Timer 2 OFF time.
6. The Deluxe Outdoor Bark Control will automatically default to Timer
2 ON
(8) in the display. This step must be completed for the Timer 2
sequence to be completed.
7. Press and release the “HR” button once and “12:00AM” will flash.
7
8
8. Press and release the “HR” button to the correct hour; be sure to note the correct AM/PM setting.
9. Press and release the “MIN” button to the correct minutes.
10. Press and release the “SELECT” button to confirm the Timer 2 ON time.
11. After confirming the time, the Deluxe Outdoor Bark Control will automatically switch to Reset
in the menu. Continue to press and release the “SELECT” button until the menu returns to the
current time
(3).
– If you have scheduled Timer 2 it will continue to turn off/on daily until the time is reset or
the battery needs replacing.
To Reset the Clock and Timers
1. Press and release the “SELECT” button until “rSt” flashes in the LCD.
2. Press and hold the “HR” and “MIN” buttons simultaneously.
3. All times are now reset.
Note: To keep the current time and reset Timer 1 and/or Timer 2 times, you do
not have to reset all times. Press and release the “SELECT” button to
scroll through the menu options until you arrive at the Timer 1 / Timer 2 time that needs updating. Press
the “HR” or “MIN” that needs updating. Press “SELECT” again to confirm the updated time. Press
and release the “SELECT” button until you return to the current time.
To Test the Deluxe Outdoor Bark Control
Important: When testing the Deluxe Outdoor Bark Control no dog(s) should be within
range of the unit to ensure they don’t receive a correction while testing.
1. Press and hold the “HR” and “MIN” buttons simultaneously for 3 seconds.
2. The Deluxe Outdoor Bark Control will display “tSt” to indicate it is in
Test Mode.
3. Say the word “Bark” loudly or blow into the microphone located on the
top front of the unit.
4. The Deluxe Outdoor Bark Control will detect this sound and emit 3 short beeps and flash the
Red LED to show it is working.
5. You may repeat steps 3—4 if necessary to ensure the unit is working.
6. After 30 seconds the Test Mode will automatically time-out and the unit will return to normal
operation. You may also press and release the “SELECT” button to end the Test Mode.
Precautions should be taken when testing the Deluxe Outdoor Bark. Avoid repeating the
Test Mode for long periods of time. See page 2 for more details.
Summary of Contents for Deluxe Outdoor Bark Control PBC00-12788
Page 11: ...www petsafe net 11 ...