www.petsafe.net
19
FI
DA
SV
EN
NO
To Cancel Pause Feed Mode:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press the DOWN button until the pause indicator “
ll
” is removed from the LCD screen
and displays the next scheduled meal.
View/Change Time
While in Operating Mode you can view the time set during the Initial Setup steps. Also
you can change the time or time format if you move to a different time zone or country or
during Daylight Saving Time.
To View Time:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press the
UP
button and the time will display on the LCD screen. DO NOT HOLD
button for 5 seconds or more, or you will enter the time setup menu.
To Change Time Format:
1. If buttons are locked, unlock by pressing and holding
ENTER
and
UP
buttons
AT
SAME TIME
.
2. Press and HOLD the
UP
button for 5 seconds. The time setup menu will display with
the hour field blinking.
3. Press
LEFT
button and LCD screen will display a blinking 12. Use
UP
and
DOWN
buttons to scroll to select 12 hour or 24 hour format. Use steps 3 and 4 under “To
Change/Set Time” below to set the current hour and minute.
To Change/Set Time:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press and HOLD the
UP
button for 5 seconds. The time setup menu will display with
the hour field blinking.
3. Use
UP
or
DOWN
buttons to scroll through numbers to set current hour for 24 hour
format. If in 12 hour format, use
UP
or
DOWN
buttons to scroll through numbers
to set current hour with current AM or PM time. Press
RIGHT
button to move to
minute field.
4. Use
UP
or
DOWN
buttons to scroll through numbers to set current minute. After
current minute is set, press
ENTER
or
RIGHT
button to program new time.
Setup Mode
If you wish to change, add or remove a scheduled meal, you will need to return to
Setup Mode. You can even adjust meals if you are set to the default dog or default cat
feeding schedule.
NOTE:
The default dog and cat options are intended as quick setup for first time use. The
only way to return to a default feeding schedule is to remove batteries or power adaptor
from pet feeder, wait 10 seconds and reinstall. This will take you back through the Initial
Setup steps.
