16
Customer Care Center 1-800-732-2677
To Cancel Pause Feed Mode:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press the
DOWN
button until the pause indicator “
ll
” is removed from the LCD screen
and displays the next scheduled meal.
View/Change Time
While in Operating Mode you can view the time set during the Initial Setup steps. Also you
can change the time or time format if you move to a different time zone or country or during
Daylight Saving Time.
To View Time:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press the
UP
button and the time will display on the LCD screen. DO NOT HOLD
button for 5 seconds or more, or you will enter the time setup menu.
To Change Time Format:
1. If buttons are locked, unlock by pressing and holding
ENTER
and
UP
buttons
AT
SAME TIME
.
2. Press and HOLD the
UP
button for 5 seconds. The time setup menu will display with
the hour field blinking.
3. Press
LEFT
button and LCD screen will display a blinking
12
. Use
UP
and
DOWN
buttons to scroll to select 12 hour or 24 hour format. Use steps 3 and 4 under
“To
Change/Set Time”
below to set the current hour and minute.
To Change/Set Time:
1. If buttons are locked, press
ENTER
and
UP
buttons
AT SAME TIME
to unlock.
2. Press and HOLD the
UP
button for 5 seconds. The time setup menu will display with
the hour field blinking.
3. Use
UP
or
DOWN
buttons to scroll through numbers to set current hour with current
AM or PM if in 12 hour format. Press
RIGHT
button to move to minute field.
4. Use
UP
or
DOWN
buttons to scroll through numbers to set current minute. After current
minute is set, press
ENTER
or
RIGHT
button to program new time.
Setup Mode
If you wish to change, add or remove a scheduled meal, you will need to return to Setup
Mode. You can even adjust meals if you are set to the default
dog
or default
cat
feeding
schedule.
Note:
The default dog and cat options are intended as quick setup for first time use.
The only way to return to a default feeding schedule is to remove batteries or power
adapter from feeder, wait 10 seconds and reinstall. This will take you back through the
Initial Setup steps.
To Return to Setup Mode:
1. While in Operating Mode, press and HOLD the
ENTER
button for approximately 5
seconds. The LCD screen will return to the meal menu and display the first meal
currently scheduled.
2. See steps 2 through 8 under
“To Set Custom Feeding Schedule (User)”
page 13 for
details on changing the meal settings.
To Exit Setup Mode:
1. After programming desired number of meals, return to meal number field. Press and
HOLD
ENTER
button for 5 seconds to program feeding schedule. This returns feeder
to
Operating Mode
and the screen will display the next scheduled meal.