www.petsafe.net
13
GET
TING ST
AR
TED
GET
TING ST
AR
TED
pet text screen will appear with
Pet n
(with n being the next available number) listed at the bottom of the screen. You
can leave the pet name as default Pet n or you can rename the pet. To rename the pet, use the arrow keys on the 5-Star
Navigation to scroll through the text entry screen to CLR. Press the enter button on 5-Star Navigation to clear name. Use
the arrow keys to select letters on the text screen to type
pet’s name. Select the
symbol on text screen to
complete the new name.
You will then see a screen asking if you want to add
additional pets. If you are programming an additional
pet, ensure your pet is within a few feet of the PASSport
™
since you will only have 30 seconds to program.
Repeat for all pets you want programmed to use the
PASSport
™
. If multiple pets have been programmed, you may want to keep a list of which pet is Pet 1, Pet 2, etc. if you
did not rename pets.
If your pet’s PASSport Key
™
is not successfully programmed, you will receive a failure message.
If the PASSport Pet Access Smart System
™
does not program your pet’s PASSport Key
™
after a few tries, double check for
household appliances or electronic devices that may be interfering and remove them from the location. Also check to
make sure the PASSport Key
™
is hanging on the front of your pet’s collar under the neck with the key parallel to the
PASSport
™
flap. Try to program your pet’s PASSport Key
™
again. If you continue to have issues, move the PASSport
™
to
another location and follow the “Program Pet” steps once more. If the attempt to program your pet’s PASSport Key
™
in
the new location is unsuccessful, please contact our Customer Care Center for additional help.
Once you have completed programming of all pets to
the PASSport
™
, the LCD screen should display the Main
Menu. If the “Initial User Set Up and Programming
Pet” are successful, you are now ready to install the
PASSport
™
. Do
NOT
proceed with installation.
Installing the PASSport Pet Access Smart System
™
Checklist Before Installation
Before installing the PASSport Pet Access Smart System
™
, it is important to consider the following:
*
Clock battery is installed.
*
If using the power adapter, you have located a power outlet in planned location where power adapter can plug in.
If not, you have a power cord extension to reach the outlet or instead are using the optional PASSport Rechargeable
Battery
™
(sold separately) as the power source.
*
Planned location has been checked for possible radio-frequency interference by ensuring all common household
appliances and electronic devices are at least two feet away.
*
“Initial User Setup” steps to set the language, time and date have been completed.
*
Each pet to use the PASSport
™
has a PASSport Key
™
and is successfully programmed to the pet door.
*
If installing in a door, will any components of the PASSport Pet Access Smart System
™
be obstructed by the door
opening and closing?
*
If installing in a wall, do you have a PASSport
™
Wall Entry Kit? The PASSport
™
fits doors or applications 1” to 2”
thick. Wall installations and thicker applications 3 ½” up to 12” require the PASSport
™
Wall Entry Kit (sold separately,
