24
Customer Care Center 1-800-732-2677
PROGR
AMMING
7. Use the down arrow key to highlight the second time slot. Press the right arrow key to select. Repeat steps 5 & 6 to
select the pet access mode and scheduled time for the access. Repeat steps for as many times as you want to schedule.
Remember a minimum of 2 time slots are required but up to 4 time slots are available. After you select and enter your
desired access options and scheduled times, review the Access Time menu screen to make sure what you entered is
correct.
If 2 time slots have not been selected, you will receive
an error screen. The Master Access Mode will then default
back to Smart Mode.
Timer Mode Example:
It might be helpful to think of Timer Mode in the form of a timeline. If you want your pets to
have full access during the daytime (i.e. from 7 am in the morning until the late evening) but want them to be indoors at
night (i.e. at starting at 7 pm), you would want to set their access mode to
Smart Mode
(In/Out) at 7 am and then their
access mode to
In-Only
at 7 pm.
After using Timer Mode to program the example listed, the
Access Time menu screen would display:
TO REMOVE TIMER MODE ACCESS TIME (Master Access)
1. If you want to remove an access time for timer mode from the Main Menu select > Setup > Pet Settings > Master
Access > Mode: Timer
2. Press the right arrow key to scroll to the Timer option to
select.
3. Once Timer has been selected, Access Time will appear
at the bottom of the Master Access Menu list. Use the down
arrow key to highlight Access Time and then the right arrow
key to select.
4. Use the up and down arrow keys to highlight which
Access Time slot you wish to remove. Push the right arrow key
to select.
5. Use the down arrow key to highlight
Remove
and the
right arrow key to select. The time slot on the Access Time
Menu should now be removed. Please remember you must
have a minimum of two Access Time slots for Timer Mode to
work.
RE-LATCH TIME (Master Access)
12 am
7 am
12 pm
7 pm
11 pm
In Only
Smart Mode (in/Out)
