Petsafe PIF-300, Operating And Training Manual

8 1-800-732-2677

To Set the Static Correction Level

Read all steps before attempting to set 

the Static Correction Level. 

1.  Remove the clear plastic cover with the 

edge of the Test Light Tool to expose 

the Correction Level Button (

2D

).

2.  With the battery installed, press the 

Correction Level Button and release 

when the Receiver LED Indicator Light 

lights up (

2E

).

3.  The Receiver LED Indicator Light will 

emit a series of flashes representing 

the Static Correction Level.

4.  Increase the Static Correction Level by 

pressing and releasing the Correction 

Level Button within 5 seconds of the 

previous series of flashes.

2D

2E

5. After setting the Static Correction Level, replace the cover to protect the Correction Level Button.
The Static Correction levels increase in strength from 1 to 6. Pushing the Correction Level Button 

while the Receiver Collar is on level 6 will cause the Receiver Collar to revert to level 1. Refer to the 

Function and Response Table to choose the Static Correction level that best fits your pet.
The Receiver Indicator Light acts as a low battery indicator. The light will flash every 4 to 5 seconds 

when battery replacement is required.

Battery Contact Verification

Remove Receiver Collar from your pet. Press the button and verify that the LED light illuminates. If 

the LED light does not come on remove the battery. Locate the metal tabs in the battery well. Gently 

lift the tabs to ensure that the battery will make good contact. Replace the battery into the Receiver 

Collar. Press the button and check that the LED light illuminates.

Function and Response Table

Indicator Light 
Response

Static 
Correction 
Level

Receiver Collar Function

Temperament of Pet

1 Flash

1

No Static Correction, Tone Only

Initial Training Mode

2 Flashes

2

Low Static Correction

Timid

3 Flashes

3

Medium-Low Static Correction

Timid or Average

4 Flashes

4

Medium Static Correction

Average Energy

5 Flashes

5

Medium-High Static Correction

Average or High Energy

6 Flashes

6

High Static Correction

High Energy

Flashes once every 

4 to 5 seconds

Indicates Low Battery

Over Correction Protection

If your pet enters the Boundary Zone or continues anywhere beyond the Pet Area, this feature limits 

the Static Correction duration to 30 seconds.
In the unlikely event that your pet leaves the Pet Area, he will not receive a Static Correction upon 

return to the Pet Area.