1. PREPARATION
2. OVERVIEW OF FEATURES
1.
Please unpack the device and its accessories and dispo-
se of the packaging in an environmentally sound manner.
2.
Then remove the wrapper from the filter and place it in
the provided filter holder.
3.
Connect the PetTec Pet Fountain to a power source using
the supplied power adapter.
4.
Then remove the water tank and fill it with water to the
maximum fill level indicated. Note: do not fill beyond the
maximum fill level!
5.
Note: we recommend replacing the filter after every
4-8 weeks of use. Filters can be purchased in 3-packs
1.
DThe PetTec Pet Fountain can be turned on and off by
briefly pressing the multifunction button.
2.
The PetTec Pet Fountain features two different operating
modes; you can switch back and forth between these by
briefly holding down the multifunction button:
Standard mode
(LED indicator green): the water in the water tank
is pumped continuously, so it is constantly filtered and cleaned.
Eco mode
(LED indicator yellow): the water in the water tank is
pumped periodically. The water is filtered and cleaned only while
the pump is active.
3.
Note: switch between modes by briefly holding down the
multifunction button.
